Contact
How can I help?
Don’t hesitate, put us to the test. Start by getting in contact with me.
Bengt Carlback

Our 60 years of experience in producing tungsten carbide nailing tools has taught us a lot about the different machine manufacturers and we have met most of the challenges in precision manufacturing over the years. This means that we will most likely find a solution together with you, no matter how complex it may seem. Contact us, and we can have a non-binding discussion.
Contact
Don’t hesitate, put us to the test. Start by getting in contact with me.
Our die holders are available with both soldered tungsten carbide inserts and replaceable tungsten carbide inserts. The replaceable tungsten carbide inserts can be both round and square. Round inserts are available with up to three wire profiles. We produce die holders for the most common types of machine.
WAFIOS | INSERT SIZE |
N25, N40, S25, S40, S50 | Ø12x12mm |
N2, N3, N50, S75 | Ø16x15mm |
N4, N5, N6, N90, N75, N100, N140, S70, S110, S140, S200, S260 | Ø22x21mm |
KOVOPOL | INSERT SIZE |
THA14/32, THA25/60, THA31/80-B, THA40/120-B | Ø16x15mm |
THA31/80-A, THA40/120-A | Ø22x21mm |
VITARI | INSERT SIZE |
V10/R, V14/R | Ø12x12mm |
V17/R, V20/R, V23/R, V27/R, V30/R | Ø22x21mm |
MORONI | INSERT SIZE |
SPN.50 | Ø12x12mm |
SPN.70, SPN.120 | Ø16x15mm |
SPN.170, SPN.240, SPN.320 | Ø22x21mm |
TANISAKA | INSERT SIZE |
MTG-A, MTG-B | Ø12x12mm |
MTG-C, MTG-D | Ø16x15mm |
MTG-E, MTG-F | Ø22x21mm |
Couldn’t find what you were looking for? Get in touch, and I’ll help!
Cutting knives come with a replaceable cutting unit with double cutter profile. When one has been worn out, simply turn the insert until the new cutter profile appears. Once that insert is worn out, it can be replaced with a new one. Switching out one cutter inserts for another is quick and easy. This system eliminates the need for re-grinding, and you can use inserts instead of getting entirely new tools. Cutter inserts for all machine sizes are always in stock and can be delivered immediately. Star points and diamond points are our standard option and are also available in a two-wire version. We supply 40º and 60º angle cutters as standard, but other angles can be supplied on request.
WAFIOS | INSERT SIZE |
N25, N40, N50, S25, S40, S50 | 12x12x5 |
N2, N3, N75, S70, S75 | 16x16x6 |
N4, N5, N100, N140, S110, S140 | 20x20x8 |
N6, S200, S260 | 22x22x10 |
N31D | 18x18x8 |
N41D | 20x20x8 |
N51D | 24x24x8 |
N61D | 24x24x10 |
KOVOPOL | INSERT SIZE |
THA14/32-B, THA25/60-B | 12x12x5 |
THA14/32-A, THA25/60-A | 16x16x6 |
THA31/80, THA40/120 | 20x20x8 |
THA35/63, THA35/80 | 24x24x8 |
VITARI | INSERT SIZE |
V10/R | 12x12x5 |
V14/R | 16x16x6 |
V17/R | 20x20x8 |
V20/R, V23/R, V27/R, V30/R | 22x22x10 |
MORONI | INSERT SIZE |
SPN.50 | 12x12x5 |
SPN.70 | 16x16x6 |
SPN.120 | 20x20x8 |
SPN.170, SPN.240, SPN.320 | 22x22x10 |
TANISAKA | INSERT SIZE |
MTG-A, MTG-B | 16x16x6 |
MTG-C, MTG-D | 20x20x8 |
MTG-E, MTG-F | 22x22x10 |
Couldn’t find what you were looking for? Get in touch, and I’ll help!
Punches are manufactured according to the customers requests: plain, profiled or grooved.
Couldn’t find what you were looking for? Get in touch, and I’ll help!
A° | Wafios No. |
---|---|
35° | 4226.5.1227.00 |
40° | 4226.5.1202.00 |
40° | 4226.5.1202.03 |
47° | 4226.5.1203.00 |
60° | 4226.5.1241.02 |
Wafios No. |
---|
4226.5.1230 |
Wafios No. |
---|
4226.5.1308 |
Wafios No. | ØD | L |
---|---|---|
4226.5.1370 | 20 | 126 |
4226.5.1351 | 20 | 130 |
4226.5.1379 | 20 | 144 |
Wafios No. | ØD | L |
---|---|---|
4226.5.1271 | 20 | 126 |
4226.5.1384 | 20 | 126 |
4226.5.1387 | 20 | 144 |
Couldn’t find what you were looking for? Get in touch, and I’ll help!
Wafios No. | ØD | L |
---|---|---|
4222.5.1370 | 16 | 138 |
4222.5.1377 | 20 | 138 |
Wafios No. | ØD | L |
---|---|---|
4222.5.1371 | 16 | 138 |
4222.5.1376 | 20 | 138 |
Holding Anvil | |
---|---|
Wafios No. | 4222.5.1315 |
Cutting Knife | |
---|---|
Wafios No. | 4221.5.1301 |
Holding Tool | |
---|---|
Wafios No. | 4221.5.1310 |
Wafios No. | 4227.5.1315 |
Chisel Feeder | |
---|---|
Wafios No. | 4226.5.1308 |
A° | Wafios No. |
---|---|
40° | 4222.5.1346 |
Die Insert | Part No. |
---|---|
ØB | |
C | |
ØD | |
R |
Brazed Dies | Part No. |
---|---|
ØB | |
C | |
ØD | |
R |
Couldn’t find what you were looking for? Get in touch, and I’ll help!
NAIL POINT | NO. | HÅMEX NO. |
66° | 118B5287 | HDA6501 |
48° | 118B5036 | HDA4801 |
40° | – | HDA4001 |
66° | 118B5288 | HDB6501 |
48° | 118B5038 | HDB4801 |
40° | – | HDB4001 |
66° | 118B5123 | HDA6500 |
48° | 118B5134 | HDA4800 |
48° | 118B5893 | HDA5893 |
35° | 118B5136 | HDA3500 |
42° | 118B5182 | HDA4200 |
66° | 118B5124 | HDB6500 |
48° | 118B5135 | HDB4800 |
48° | 118B5894 | HDB5894 |
35° | 118B5137 | HDB3500 |
42° | 118B5183 | HDB4200 |
66° | 118B5188 | HDA6502 |
48° | 118B5189 | HDA4802 |
CHISEL | NO. | HÅMEX NO. |
110° | 118B5122 | HDA5122 |
110° | 118B5332 | HDB5332 |
110° | 118B5206 | HDA5206 |
110° | 118B5524 | HDB5524 |
BLUNT CHISEL | NO. | HÅMEX NO. |
66° | 118B5205 | HDA5205 |
66° | 118B5213 | HDA5213 |
66° | 118B5214 | HDB5214 |
Couldn’t find what you were looking for? Get in touch, and I’ll help!
Hamex Precision Tools
Sättunagatan 5, 582 73 Linköping, Sweden
Telephone: +46 13-35 76 50
Email: info@hamex.se